H-field pre-amplifier PCB and ferrite antennas
#1
For the system blue H-field pre-amplifier PCB - a few questions:


1.  Do the ferrites connect between just the a and b ports with the ground port left unconnected unless additional shielding is needed?

2.  Is there any polarity to the ferrites - I see references to one enameled wire with a knot being + or is this for the old system only.

3.  For ferrite antennas do the PCB jumpers need to be soldered (closed).


Thanks in advance!
Reply
#2
A single ferrite antenna will connect to A1 and A2, and the ground is there for shielding if you decide to shield the antenna.

Polarity does not matter.

No the PCB jumpers do not need to be soldered closed.
Kevin McCormick KB0UOI
Macomb, IL USA
Stations: 1539
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  home made ferrite antennas opadavis2 10 44,551 2017-07-23, 19:34
Last Post: pasense
  Blue H field Ferrite antenna in L or Delta shape? nellyt 8 47,502 2017-03-30, 03:06
Last Post: Mike6158
  H-Field Ferrite Rod Antena Parameters dieron 2 14,986 2017-02-28, 19:10
Last Post: RichoAnd
Photo H field ferrite shielding orion_jb2001 5 31,735 2015-01-30, 03:58
Last Post: orion_jb2001
  2nd H-Field Amplifier meaningful? CRogoza 1 12,648 2014-06-27, 19:24
Last Post: RichoAnd

Forum Jump:


Users browsing this thread: 1 Guest(s)