Blitzortung.org Forum

Hi guy's


I seem to have a low gain on this system (Waregem, West-Vlaanderen). Can someone help me with the settings of the jumpers?

Stats: http://www.weerstationwaregem.be/bliksem...ow=station

System: PCB 6, version 8 (2012)



Regards

Nicolas

your image doesn't show and for as much I could see via provided link, your station is offline for quite some period already

(2015-05-17, 10:59)Eric.Wouters Wrote: [ -> ]your image doesn't show and for as much I could see via provided link, your station is offline for quite some period already

Eric

This image shows the jumpers who you can use to have more gain though

And yes, station is offline when there aren't any thunderstorms in the area of Benelux.

hope this will help ?
greetings  Gert

That's one dusty amplifier
I think your gain is set to 28.

Btw, I think you should power up the system by the controller.

Here are all gains available:
A1- A2- A3- A4 = Gain

0 - 0 - 0 - 1 = 11,00
0 - 0 - 1 - 0 = 17,56
0 - 0 - 1 - 1 = 27,56
0 - 1 - 0 - 0 = 43,19
0 - 1 - 0 - 1 = 53,19
0 - 1 - 1 - 0 = 59,75
0 - 1 - 1 - 1 = 69,75
1 - 0 - 0 - 0 = 101,00
1 - 0 - 0 - 1 = 111,00
1 - 0 - 1 - 0 = 117,56
1 - 0 - 1 - 1 = 127,56
1 - 1 - 0 - 0 = 143,19
1 - 1 - 0 - 1 = 153,19
1 - 1 - 1 - 0 = 159,75
1 - 1 - 1 - 1 = 169,75

(Thx Daniel from Hannut)

Enjoy!

I have changed it into this set-up. Better?

The gain is specific to each station. 28 is maybe good for you, my green station can go up to 53.
You should set it in a way that your stations doesn't go in interference.

(2015-05-17, 12:04)DelandeC Wrote: [ -> ]Here are all gains available:
A1- A2- A3- A4 = Gain

Is 0 - 0 - 0 - 0 gain x1? Because I'm still receiving signals with no jumpers set, in the middle of a storm

[attachment=2136]

Yes it is        

The above few sharing tricks very useful to me.


Awesome stuff Guys and i would like to learn more on Here.

Keep interacting