Blitzortung.org Forum

Full Version: Error in PCB_20_7
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
When open directory "Index of /Compendium/Hardware/PCB_20_7/" , we see same file                               05-Mar-2020 15:35              94992
                        05-Mar-2020 15:35              94992
 .   If I uderstand right this files must be different.         
Hi aeromash,

you are right 16_2 should be the E-field pre-amp with just one channel. Refer to HW 20_6.
Please remove the links to the internal documents from the public forum.

Thanks
Klaus
(2020-06-12, 06:12)aeromash Wrote: [ -> ]When open directory "Index of /Compendium/Hardware/PCB_20_7/" , we see same file                               05-Mar-2020 15:35              94992
                        05-Mar-2020 15:35              94992
 .   If I uderstand right this files must be different.         


Yes, you are right.

/Egon
(2020-06-13, 04:19)gerbold Wrote: [ -> ]Hi aeromash,

you are right 16_2 should be the E-field pre-amp with just one channel. Refer to HW 20_6.
Please remove the links to the internal documents from the public forum.

Thanks
Klaus

But the link to the schematics is already public on the main website.
Look in the section:

https://www.blitzortung.org/en/cover_your_area.php

Then follow the link to 'Assembly Instructions System Blue'.  In section 2.2 the link is right there.