Hi
The component 403 or L403 has been detached due to shipping. the part was in the bag as it is close to the power input does the component have polarity? Need to know before soldering back on. See the attached photor admin removed corrupted image data
Regards
Paul
(2021-01-23, 03:39)SkippyOz Wrote: [ -> ]Hi
The component 403 or L403 has been detached due to shipping. the part was in the bag as it is close to the power input does the component have polarity? Need to know before soldering back on. See the attached photo
Regards
Paul
Polarity is irrelevant for this component. L403 passes 5V to the E preamplifier.
(2021-01-23, 12:48)cutty Wrote: [ -> ] (2021-01-23, 03:39)SkippyOz Wrote: [ -> ]Hi
The component 403 or L403 has been detached due to shipping. the part was in the bag as it is close to the power input does the component have polarity? Need to know before soldering back on. See the attached photo
Regards
Paul
Polarity is irrelevant for this component. L403 passes 5V to the E preamplifier.
Hi cutty
Thanks for that. I can get back to assembly the kit.
Regards
Paul
Hi talleychan,
Like Cutty answered before - L403 is an inductor providing power to e-field amplifier board. It is not polarized so you can solder it back without taking care about it's orientation.
Regards,
Koleto