Blitzortung.org Forum

Full Version: New pre-amplifier??
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi!

My preamp circuit board is badly corroded. Can you get that PCB 5 ver 6 circuit board from anywhere new.

I would buy a new system entirely, otherwise I don't think it's possible. My position id 319.

Matti
(2022-07-01, 16:53)Salminen Wrote: [ -> ]Hi!

My preamp circuit board is badly corroded. Can you get that PCB 5 ver 6 circuit board from anywhere new.

I would buy a new system entirely, otherwise I don't think it's possible. My position id 319.

Matti

Dear all,

since the production of the next SystemBlue detectors can still take a few months, we are providing the hardware details for everyone to manufacture their own boards/detectors. This currently relates to SystemGreen, for the design of spare parts, and to SystemRed. The manufacturing details for SystemBlue detectors will be released later. The addresses are

https://www.blitzortung.org/Compendium/L...ystemGreen
https://www.blitzortung.org/Compendium/L.../SystemRed
https://www.blitzortung.org/Compendium/L...SystemBlue

/Egon
(2022-07-01, 16:53)Salminen Wrote: [ -> ]Hi!

My preamp circuit board is badly corroded. Can you get that PCB 5 ver 6 circuit board from anywhere new.

Unfortunately too late to help you, but for anyone else reading this I'd really recommend applying a conformal coating like MG 422B to anything that's going to be installed outdoors, it'll greatly extend its life in the presence of moisture and contaminants.
(2022-07-10, 19:16)Egon Wrote: [ -> ]
(2022-07-01, 16:53)Salminen Wrote: [ -> ]Hi!

My preamp circuit board is badly corroded. Can you get that PCB 5 ver 6 circuit board from anywhere new.

I would buy a new system entirely, otherwise I don't think it's possible. My position id 319.

Matti

Dear all,

since the production of the next SystemBlue detectors can still take a few months, we are providing the hardware details for everyone to manufacture their own boards/detectors. This currently relates to SystemGreen, for the design of spare parts, and to SystemRed. The manufacturing details for SystemBlue detectors will be released later. The addresses are

https://www.blitzortung.org/Compendium/L...ystemGreen
https://www.blitzortung.org/Compendium/L.../SystemRed
https://www.blitzortung.org/Compendium/L...SystemBlue

/Egon

Access to System Blue is forbidden
(2022-09-19, 12:44)Tabatha Wrote: [ -> ]
(2022-07-10, 19:16)Egon Wrote: [ -> ]
(2022-07-01, 16:53)Salminen Wrote: [ -> ]Hi!
My preamp circuit board is badly corroded. Can you get that PCB 5 ver 6 circuit board from anywhere new.
I would buy a new system entirely, otherwise I don't think it's possible. My position id 319.
Matti

Dear all,
since the production of the next SystemBlue detectors can still take a few months, we are providing the hardware details for everyone to manufacture their own boards/detectors. This currently relates to SystemGreen, for the design of spare parts, and to SystemRed. The manufacturing details for SystemBlue detectors will be released later. The addresses are
https://www.blitzortung.org/Compendium/L...ystemGreen word hurdle
https://www.blitzortung.org/Compendium/L.../SystemRed
https://www.blitzortung.org/Compendium/L...SystemBlue
/Egon

Access to System Blue is forbidden

What is the reason for the ban?
It's accessible right now, must have been just a config problem.
(2022-07-01, 16:53)Salminen Wrote: [ -> ]Hi!

My preamp circuit board is badly corroded. Can you get that PCB 5 ver 6 circuit board from anywhere new.

I would buy a new system entirely, otherwise I don't think it's possible. My position id 319.

Matti

Salminen, I cannot write private message to you. Please see https://forum.blitzortung.org/showthread...5#pid25355