+- Blitzortung.org Forum (https://forum.blitzortung.org/mybb)
+-- Forum: Public Forums (https://forum.blitzortung.org/mybb/forumdisplay.php?fid=29)
+--- Forum: Hardware, Software, Lightning Physics (https://forum.blitzortung.org/mybb/forumdisplay.php?fid=30)
+--- Thread: Account Setup (/showthread.php?tid=2785)
RE: Account Setup - Mike - 2018-12-04
I can download 9.1...it appears as a .bin file
But I do not have any Tools page....in my controller page..
I have login, Status and About.....those are the only tabs at the top of the page
Station 0
FW 9.0b1PCB 19.4/H1/E1
SYSGPSNETAMPSIG0/s00:00:46
Login
Status
About
Auto Refresh
RE: Account Setup - dupreezd - 2018-12-04
(2018-12-04, 02:49)Mike Wrote: I can download 9.1...it appears as a .bin fileCan you post a screen shot?
But I do not have any Tools page....in my controller page..
I have login, Status and About.....those are the only tabs at the top of the page
Station 0
FW 9.0b1PCB 19.4/H1/E1
SYSGPSNETAMPSIG0/s00:00:46
Login
Status
About
Auto Refresh
RE: Account Setup - dupreezd - 2018-12-04
(2018-12-04, 02:52)dupreezd Wrote:This is what mine looks like(2018-12-04, 02:49)Mike Wrote: I can download 9.1...it appears as a .bin fileCan you post a screen shot?
But I do not have any Tools page....in my controller page..
I have login, Status and About.....those are the only tabs at the top of the page
Station 0
FW 9.0b1PCB 19.4/H1/E1
SYSGPSNETAMPSIG0/s00:00:46
Login
Status
About
Auto Refresh
RE: Account Setup - vk2him - 2018-12-04
Mike-
The problem is that you have enabled "Need Authentication" under Web Interface in the settings tab and you are viewing the Status page as a guest - in other words you have not logged in to your controller yet so most stuff is hidden including the Device ID numbers you need.
To make this work, you need to press the Login link and then login using the username and password you created initially. Once you're logged in you will be able to view the Device ID numbers you need. Unless you specifically want to user that login facility, you can disable the "Need Authentication" . Most of us don't have it enabled as we don't have our controller's status page exposed to the internet using port forwarding.
Hope that helps. Cheers
RE: Account Setup - Mike - 2018-12-04
Ok, now we're getting somewhere....Vk2him, you were correct...I know have the full list as described....
Seems, putting in the INCORRECT PASSWORD does not flag it as incorrect and I was assuming that I was actually logging in with the CORRECT PASSWORD....
Woke up at 1:45 in the morning still thinking about this and happened to get up and check this form and you guys came through....Thank You, Thank You.....but I'm going back to bed.....
Mike
RE: Account Setup - Mike - 2018-12-04
Good Morning,
I've updated the firmware to 9.1..... everything seems so simple with a little help from "Friends of the Forum"
Thanks Very Much... I'm sure I'll have more questions down the road...
Mike
Eagle River
RE: Account Setup - Mike - 2018-12-04
Finding my user #XXXX and station #2334 after logging into the Contributors site..... I see myself on the Users List but not on the Stations List...
and how do I know if I'm a fully reporting station....
Thanks Again,
Mike
Eagle River
(mod:removed user#-public thread-)
RE: Account Setup - cutty - 2018-12-04
(2018-12-04, 15:11)Mike Wrote: Finding my user #XXXX and station #2334 after logging into the Contributors site..... I see myself on the Users List but not on the Stations List...
and how do I know if I'm a fully reporting station....
Thanks Again,
Mike
Eagle River
(mod:removed user#-public thread-)
Not sure this is complete issue... but if you have 'anonymous' "Y" on your station config page, Make sure it is "N".
You may also be a 'victim' of the new server databases and processing still a bit groggy ... additionally it may take a couple of hours
to update presently... I'm not sure what schedule he has it running on.,.. or which regional servers he's working on.
RE: Account Setup - cutty - 2018-12-04
(2018-12-04, 17:22)Cutty Wrote:(2018-12-04, 15:11)Mike Wrote: Finding my user #XXXX and station #2334 after logging into the Contributors site..... I see myself on the Users List but not on the Stations List...
and how do I know if I'm a fully reporting station....
Thanks Again,
Mike
Eagle River
(mod:removed user#-public thread-)
Not sure this is complete issue... but if you have 'anonymous' "Y" on your station config page, Make sure it is "N".
You may also be a 'victim' of the new server databases and processing still a bit groggy ... additionally it may take a couple of hours
to update presently... I'm not sure what schedule he has it running on.,.. or which regional servers he's working on.
Check your Email ...
RE: Account Setup - Mike - 2018-12-05
Cutty,
Anonym has always been set at "N"....
Mike