2024-01-30, 22:55
It looks like you are in Auto mode and going into interference mode. On the Settings tab under Remote Control, set you controller to Manual. Then under Amp 1 set all channels to 10*10 and a threshold of 100mV and see what it looks like then.
Also disconnect the H amplifier to isolate noise coming from there. You might have noise/interference from another damaged device or power supply.
Also disconnect the H amplifier to isolate noise coming from there. You might have noise/interference from another damaged device or power supply.
![[Image: NOAARADlogoTXT80.png]](https://noaaweatherradio.org/icons/NOAARADlogoTXT80.png){kind=icon}