+- Blitzortung.org Forum (https://forum.blitzortung.org)
+-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29)
+--- Forum: General Discussion (https://forum.blitzortung.org/forumdisplay.php?fid=31)
+--- Thread: Raw schematic files? (/showthread.php?tid=3766)
Raw schematic files? - core - 2023-11-01
Hello! Other threads relating to this haven't been active for several months, so I figured I would start a new one. Was looking into setting up a detector to contribute data and get access to raw data, but it seems those are impossible to purchase at the moment, so instead I am looking into manufacturing my own.
I have located screenshots of schematics and board files at this link (https://www.blitzortung.org/Compendium/Hardware/PCB_20_7/ which is linked publicly in the documentation), but I was unable to find any raw schematic files (to open with EDA software to generate gerbers). Are these available anywhere so I can generate files and order parts to manufacture a board myself?
RE: Raw schematic files? - mendip_defender - 2023-11-01
One person has made a small batch of them and will possible make some more in the future. There is a long list of people wanting to joing in.
RE: Raw schematic files? - core - 2023-11-01
Yeah, I did see that earlier. Is my answer a no then? I could fairly easily source and manufacture a board myself but only if the correct files are provided - is there a way to get them or is manufacturing just done by this one person?
RE: Raw schematic files? - cutty - 2023-11-02
(2023-11-01, 19:41)core Wrote: Yeah, I did see that earlier. Is my answer a no then? I could fairly easily source and manufacture a board myself but only if the correct files are provided - is there a way to get them or is manufacturing just done by this one person?
https://forum.blitzortung.org/showthread.php?tid=3159&pid=25355#pid25355
RE: Raw schematic files? - meteodelta - 2023-11-26
(2023-11-02, 12:02)cutty Wrote:(2023-11-01, 19:41)core Wrote: Yeah, I did see that earlier. Is my answer a no then? I could fairly easily source and manufacture a board myself but only if the correct files are provided - is there a way to get them or is manufacturing just done by this one person?
https://forum.blitzortung.org/showthread.php?tid=3159&pid=25355#pid25355
Gerbers, drills and assembly are available. Eagle files too. What else do you need ?