Blitzortung.org Forum
Some PCB 22.0 nd PCB 22.1 detectors for sale - Printable Version

+- Blitzortung.org Forum (https://forum.blitzortung.org)
+-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29)
+--- Forum: General Discussion (https://forum.blitzortung.org/forumdisplay.php?fid=31)
+--- Thread: Some PCB 22.0 nd PCB 22.1 detectors for sale (/showthread.php?tid=3849)



Some PCB 22.0 nd PCB 22.1 detectors for sale - Egon - 2024-05-01

Dear all,

we have a few PCB 22.0 and PCB22.1 test boards with which we tested the need for some components. It is a minimal version of a detector based on System Blue with only two amplifiers for magnetic antennas. Some SMD components were manually soldered onto these boards. It is a fully usable detector that is equivalent to System Blue in standard operation. This variant will be developed to offer a cheaper alternative entry option for participants.

The price for PCB 22.0 with preamplifier PCB 23.1 is 149 euros plus shipping. The price for PCB 22.1 with preamplifier PCB 23.1 is 199 euros plus shipping. PCB 22.2 will be available from mid-July with preamplifier PCB 23.1 for 249 euros.

Please write me a private message, if you are interested.

/Egon

the attachement shows the PCB 22.1/23.1 kit


RE: Some PCB 22.0 detectors for sale - gerbold - 2024-05-25

Hi Egon,

I cannot find the description of the board 22.0 / 22.2 / 23.1 yet. Will it be uploaded to https://www.blitzortung.org/Compendium/Hardware/?

Regards
Klaus


RE: Some PCB 22.0 detectors for sale - gerbold - 2024-05-27

(2024-05-27, 02:05)pickledgang Wrote: These are minimal versions of a detector, equipped with two amplifiers for magnetic antennas. Some surface-mount device (SMD) components were manually soldered onto these boards.

Yes, correct, this is what Egon already wrote. I'm interrested in the schematics.


RE: Some PCB 22.0 detectors for sale - cutty - 2024-05-27

(2024-05-27, 05:44)gerbold Wrote:
(2024-05-27, 02:05)pickledgang Wrote: These are minimal versions of a detector, equipped with two amplifiers for magnetic antennas. Some surface-mount device (SMD) components were manually soldered onto these boards.

Yes, correct, this is what Egon already wrote. I'm interrested in the schematics.
I purged the spammer pickledgang...


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - ArnouldJ - 2024-06-01

Hi Egon, 

I don't know if you received my private message but I would be happy to buy a version for 149 euros if there are any left. 

Thanks in advance.


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - patoffgrid - 2024-06-04

Hello,
I'm  new user on this forum and don't have a possibility to send a private message but I'm interested for 1 kit at 149 euros.
please let me know

Best regards

Patrick
Shy
request closed 04-06-2024 Lightning

Station 3059


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - Broms - 2024-06-09

Hi Egon

I used to have Green system running under the station name of Carrowhawney in 2011 - this was based in Ireland. For various reasons I had to shut it down. I would be interested in purchasing a PCB22.1 complete with the pre-amplifier 23.1 for the €199 to be located in the UK close Bodmin Moor.

I did try and PM you but as my account is new the system wouldn’t let me.

Regards Phil Bromley


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - mgor - 2024-06-09

Hallo Egon, kann man von dir direkt ein System Blue kaufen? viele Grüße


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - gadis - 2024-06-10

Hello, I would like to buy a complete system of blue. There is a possibility?


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - Hoelters - 2024-06-13

Hi Egon (all)
What is the difference to
PCB 22.0, PCB 22.1 and PCB 22.2?


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - cutty - 2024-06-14

(2024-06-13, 21:28)Hoelters Wrote: Hi Egon (all)
What is the difference to
PCB 22.0, PCB 22.1 and PCB 22.2?

22.2 will be the production controllers to  be available soon.  The others were prototype, test-build developmental boards for development and testing purposes. Very similar to what will be released shortly, minor differences only for the most part. I think major difference is power supply bus to preamp will be built isolated, rather than a 'jumper select', and at 4.5 instead of 5, to prevent Controller damage if preamp or cat cable should short.  Only a VERY small number of x0 and x1 were available. Not sure there are any left. Blue Mini uses the familiar Blue Max firmware.
Mike


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - TI3GB Greg - 2024-06-19

(2024-05-01, 17:30)Egon Wrote: Dear all,

we have a few PCB 22.0 and PCB22.1 test boards with which we tested the need for some components. It is a minimal version of a detector based on System Blue with only two amplifiers for magnetic antennas. Some SMD components were manually soldered onto these boards. It is a fully usable detector that is equivalent to System Blue in standard operation. This variant will be developed to offer a cheaper alternative entry option for participants.

The price for PCB 22.0 with preamplifier PCB 23.1 is 149 euros plus shipping. The price for PCB 22.1 with preamplifier PCB 23.1 is 199 euros plus shipping. PCB 22.2 will be available from mid-July with preamplifier PCB 23.1 for 249 euros.

Please write me a private message, if you are interested.

/Egon

the attachement shows the PCB 22.1/23.1 kit

I'm interested in one of those, I'm based in Costa Rica, Central america and I would like to be the first one with a receiver to support the project. 

Thank you!


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - marc - 2024-06-29

(2024-05-01, 17:30)Egon Wrote: Dear all,

we have a few PCB 22.0 and PCB22.1 test boards with which we tested the need for some components. It is a minimal version of a detector based on System Blue with only two amplifiers for magnetic antennas. Some SMD components were manually soldered onto these boards. It is a fully usable detector that is equivalent to System Blue in standard operation. This variant will be developed to offer a cheaper alternative entry option for participants.

The price for PCB 22.0 with preamplifier PCB 23.1 is 149 euros plus shipping. The price for PCB 22.1 with preamplifier PCB 23.1 is 199 euros plus shipping. PCB 22.2 will be available from mid-July with preamplifier PCB 23.1 for 249 euros.

Please write me a private message, if you are interested.

/Egon

the attachement shows the PCB 22.1/23.1 kit

Hi! 
I tried sending a PM but I don't have permissions yet, I was on the previous waitlist and I'd like to purchase a kit of one of the new PCBs as well to contribute as station near Barcelona(Spain). Thank you for your great effort!


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - DanielO - 2024-07-08

(2024-05-01, 17:30)Egon Wrote: we have a few PCB 22.0 and PCB22.1 test boards with which we tested the need for some components. It is a minimal version of a detector based on System Blue with only two amplifiers for magnetic antennas. Some SMD components were manually soldered onto these boards. It is a fully usable detector that is equivalent to System Blue in standard operation. This variant will be developed to offer a cheaper alternative entry option for participants.

The price for PCB 22.0 with preamplifier PCB 23.1 is 149 euros plus shipping. The price for PCB 22.1 with preamplifier PCB 23.1 is 199 euros plus shipping. PCB 22.2 will be available from mid-July with preamplifier PCB 23.1 for 249 euros.
Hi Egon,
I would be interested in the 22.1 w/ preamp. 
I tried DMing but I am not allowed (this is a new account - although I could swear I joined years ago)

Thanks.


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - Kets_One - 2024-07-10

Egon,

I'm interested in purchasing an additional H2 preamp for experimenting with various loop and ferrite antenna's.

Regards,
Kets


RE: Some PCB 22.0 nd PCB 22.1 detectors for sale - Olivier_FR67 - 2024-07-29

Dear All,

Someone have news about the System Min PCB 22.2 + PCB 23.1 ? (full functional, not the testing version)

Many thanks in advance.