+- Blitzortung.org Forum (https://forum.blitzortung.org)
+-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29)
+--- Forum: General Discussion (https://forum.blitzortung.org/forumdisplay.php?fid=31)
+--- Thread: PCB red system production plan (/showthread.php?tid=3938)
PCB red system production plan - meteolab - 2024-09-08
hi everyone. Is there somewhere to download a plan for your own PCB red system production?? Is there anyone who built their own hardware?? Thanks for the answers.
RE: PCB red system production plan - gerbold - 2024-09-09
The places with HW documentations that I know of are here:
https://docs.lightningmaps.org/hardware/lightning-detectors/hardware_reference/
https://www.blitzortung.org/en/station_list.php from there follow the menue Project Area -> Compendium and there Hardware.
RE: PCB red system production plan - meteolab - 2024-09-10
Thank you, hopefully it will help me in production
RE: PCB red system production plan - meteolab - 2024-09-20
(2024-09-09, 04:25)gerbold Wrote: The places with HW documentations that I know of are here:
https://docs.lightningmaps.org/hardware/lightning-detectors/hardware_reference/
https://www.blitzortung.org/en/station_list.php from there follow the menue Project Area -> Compendium and there Hardware.
On the error page amplifier board for the red system in .brd format for the EAGLE AUTODESK program. If anyone has this file, please write to me. thank you
RE: PCB red system production plan - pathmoronic - 2024-10-03
(2024-09-09, 04:25)gerbold Wrote: The places with HW documentations that I know of are here:
https://docs.lightningmaps.org/hardware/lightning-detectors/hardware_reference/
https://www.blitzortung.org/en/station_list.php from there follow the menue Project Area -> Compendium and there Hardware.
That's great! It's quite difficult to find an amplifier for the .brd format system for the EAGLE AUTODESK program.
RE: PCB red system production plan - meteolab - 2024-10-03
Hi all. There is someone here who has plans for the production of E-field amplifier boards ver. 13.1 and pre-amplifier ver. 14.1 for EAGLE Autodesk program in .brd format?
Thank you