![]() |
Mising parts need mouser parts - Printable Version +- Blitzortung.org Forum (https://forum.blitzortung.org) +-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29) +--- Forum: Hardware, Software, Lightning Physics (https://forum.blitzortung.org/forumdisplay.php?fid=30) +--- Thread: Mising parts need mouser parts (/showthread.php?tid=663) |
Mising parts need mouser parts - zendick - 2014-07-17 capacitor 22nf 223 http://www.mouser.com/Passive-Components/_/N-5g73Zscv7?Keyword=22NF+223+monolithic&FS=True transistor bc338 http://www.mouser.com/Search/Refine.aspx?Keyword=bc338 any help is much appreciated, the build docs do not have the specs for these parts. Also a quick question, the solder contact on the bottom of the amplifier board at R27 does not exist, I was able to get a good wick out the top of the joint but I was wondering if this is a problem, should i clean of the resin and solder in a ring or leave it. Didn't notice until bard was nearly complete. RE: Mising parts need mouser parts - Knickohr - 2014-07-17 Hi ! Where do you live ? I've some spare parts. Thomas RE: Mising parts need mouser parts - PA4EME - 2014-07-17 Hi, for both parts no special specifications are mentioned which implies you can buy the types as linked for: http://nl.mouser.com/ProductDetail/Murata-Electronics/RDEF51H223Z0K1C03B/?qs=sGAEpiMZZMukHu%252bjC5l7YTDBn7cE6nmQgujOTT%2fODq4%3d http://nl.mouser.com/ProductDetail/Fairchild-Semiconductor/BC33825TA/?qs=sGAEpiMZZMshyDBzk1%2fWi4G1GLBZKHK1srZAwdY46Oo%3d If this are the only parts you need, maybe it's better not to order them at Mouser but get them at a local electronic store. The part will cost more but they won't charge you shipping costs so you will end up cheaper at the end. Regards, Frank Veldhuijsen, PA4EME RE: Mising parts need mouser parts - RichoAnd - 2014-07-17 BC338 ? Any small signal npn-transistor can be used, BC547,548,549 RE: Mising parts need mouser parts - zendick - 2014-07-18 I wound up locally (horrible selection) 2 223j polyfilm caps and a mps2222a npn transistor we'll see how they work out ![]() Both the amp board and main board power up with all appropriate lighting. Awaiting arrival account to complete setup and testing, as well as final layout of antennas RE: Mising parts need mouser parts - RichoAnd - 2014-07-18 They are just fine |