"Idle" Indication
#4
(2014-04-27, 19:00)Dr Obbins Wrote: Station 946 station is relatively new and been working well since installation. Today it was rebooted and is showing as either "idle" or "running" with zero signals. I have tried rebooting many times with in the past hour, with the web interface, button on the side and unplugging the power source and still no luck. On the "Status" page it is showing that signals are being sent. But it is showing "Idle" and zero signals received on the Blitzortung.org page. The router has been rebooted also.

The unit is connected to a 4 port switch -> router -> DSL modem. There have not been any changes here to any of the network setup.

In summary, everything here appears to be working OK and all components have been rebooted. What to look for or try next?

I had the same problem a couple months back. Does your station ID and user ID show on the controller's status page? Mine were missing when I troubleshot this. I thought it was the ethernet chip so I bought a new one. The problem fixed itself 24 hours (almost exactly) after it started. I still have the controller chip in case it flakes out again though. Wink

My path from the controller to the interwebs is the same as yours.

Hope this helps
Stations: 724, 1945
Reply


Messages In This Thread
"Idle" Indication - by argus42 - 2014-01-28, 09:54
RE: "Idle" Indication - by Tobi - 2014-01-30, 21:04
RE: "Idle" Indication - by Dr Obbins - 2014-04-27, 19:00
RE: "Idle" Indication - by scarecrow93 - 2014-04-27, 19:41
RE: "Idle" Indication - by Tobi - 2014-04-27, 19:57
RE: "Idle" Indication - by Dr Obbins - 2014-04-27, 22:05
RE: "Idle" Indication - by Einar - 2014-12-03, 18:32
RE: "Idle" Indication - by DanJanni - 2014-12-03, 18:50

Possibly Related Threads…
Thread Author Replies Views Last Post
  Intermittend Idle problems Europe WSOverijse 4 25,256 2015-03-14, 17:01
Last Post: Tobi

Forum Jump:


Users browsing this thread: 1 Guest(s)