System blue web page fails
#4
Reflashing seems a bit excessive when you could just plug the receiver directly (not via a switch/router) into a PC ethernet port and manually configure that port to say 192.168.1.230 netmask 255.255.255.0 (DNS/gateway not relevant). That PC's browser should then be able to connect to the default receiver IP address. Might be a minute or two after powering up the receiver before it gives up on DHCP and defaults. Also assumes that the reciever hasn't previously been set to a static IP. Don't forget to put the PC's port back to how it was when you've finished. B-)

Unless you have *really* old kit you won't need a crossover cable, the ports will sort themselves out.
Cheers
Dave.

Stations: 1627
Reply


Messages In This Thread
System blue web page fails - by EA3BNF - 2017-05-28, 19:49
RE: System blue web page fails - by allsorts - 2017-05-28, 22:51
RE: System blue web page fails - by DelandeC - 2017-05-29, 06:19
RE: System blue web page fails - by allsorts - 2017-05-29, 09:51
RE: System blue web page fails - by EA3BNF - 2017-05-29, 20:39
RE: System blue web page fails - by EA3BNF - 2017-06-03, 06:55

Forum Jump:


Users browsing this thread: 1 Guest(s)