blue ferrite / loop antenna connection?
#1
Hi,
can you tell me what is the best connection on the blue preamp between loop antenna or ferrite antenna? it has 3 inputs per antenna E1-E2-GND

Ferrite = E1-E2 and GND what is the correct connection?

Loop E1- E2 -?
Loop E1- GND -?
Loop E2- GND -?
(after soldering the bridge under the pcb)

Thank you for bringing me some details.

kind regards

Patrick Smile
 FRANCE --- RED S2401---  BLUE S2783
Stations: 2401, 2783
Reply
#2
(2020-10-20, 08:22)MTO-Mareuil Wrote: Hi,
can you tell me what is the best connection on the blue preamp between loop antenna or ferrite antenna? it has 3 inputs per antenna E1-E2-GND

Ferrite = E1-E2 and GND what is the correct connection?

Loop E1- E2 -?
Loop E1- GND -?
Loop E2- GND -?
(after soldering the bridge under the pcb)

Thank you for bringing me some details.

kind regards

Patrick Smile
For ferrites, three jumpers should be left open.  Those are for air core loops.  
The block "GND" is for a shield ground. open otherwise.
Loop ends connect to the + and - only.  Polarity does NOT matter.

For the E pre-amp... the probe goes to the 'inboard' block, the'outer' will always be open.  There should be NO other
connections to anywhere, except the coax itself, to the E preamp.  Zero. Nil.  doing elsewise really messes up the 'mirror' capacitance of the probe, between the probe and earth. That 'capacitance' is what does the work. Don't do anything extra.
See: https://forum.blitzortung.org/showthread.php?tid=2749


Stations: 689, 791, 1439, 3020
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Blue e-field antenna question llowrey 2 7,198 2021-07-06, 14:34
Last Post: llowrey
  GPS antenna SYSTEM BLUE ! IK1TTD 9 46,551 2020-06-03, 12:16
Last Post: GJ7DNI
  Blue System: PreAmp & Antenna Questions BassJohn 5 25,733 2018-02-28, 08:41
Last Post: BassJohn
  System Blue Voltage regulator and antenna SteveQlQ 3 18,488 2017-08-12, 14:32
Last Post: RichoAnd
  Blue H field Ferrite antenna in L or Delta shape? nellyt 8 47,504 2017-03-30, 03:06
Last Post: Mike6158

Forum Jump:


Users browsing this thread: 1 Guest(s)