System Blue Order Status 12. August 2016
#1
Information 
This thread gives you information on how to order a detector.

Please do not ask us by email, when the boards are available. We will announce it here in this thread.

Date: 12. August 2016
Status: Detectors are available


   

The ordering process of detectors is as follows. Everybody who leaves his email at the [url=//forum.blitzortung.org/www.blitzortung.org/cover_your_area.php][/url]Cover Your Area Page page is stored in a reservation list and gets a rank. If detectors are available, we will proceed according to this list. Nevertheless, about one third of the detectors will be reserved to particularly interesting locations.

In any case please
1.) read the old Project Description, (thoroughly!),
2.) read the new
 Project Description with Assembly Instruktion for System Blue (thoroughly!)



/Egon
Stations: 2656
#2
Updated on June 11th 2016

Dear Egon and fellow enthusiasts,

in case you're having trouble finding some parts of the order list and/or want to save time I may have a solution for you. After searching various sites I managed to reduce the number of suppliers down to three (Reichelt, Farnell and eBay).

BASIC SETUP:
Reichelt carries most parts for the basic setup. In this updated version I also included a substitute for the Taiyo Yuden LHL08TB332J 3300uH as suggested by RichoAnd.

1. Reichelt Shopping Cart: https://secure.reichelt.de/index.html?&A...ROVID=2084
2. HR911105A HANRUN RJ45 Connector with Integrated Magnetics: https://www.ebay.de/itm/181423290393 or https://octopart.com/hr911105a-hanrun-61493516
3. Murata Power Solutions DAC 103C: http://de.farnell.com/murata-power-solut...dp/1362400 or https://octopart.com/da103c-murata+power...s-49447873

FILTER OPTION:
If you plan to build the filter option, you can buy the additional parts at Farnell.

1. http://de.farnell.com/linear-technology/...dp/1417723 or https://octopart.com/ltc1569cs8-7%23pbf-...ogy-457848
2. http://de.farnell.com/lprs/sma-connector...dp/2096223 or https://octopart.com/sma+connector-lprs-23943633

Now, if none of these suppliers work for you, you may want to check out this part search engine. You can even upload your BOMs there and it finds suppliers, price and availability for you right away: www.octopart.com

I hope some of you find this information useful.

Best,

WX3080
Stations: 1471
#3
Description may change slightly when BLUE goes into release shortly:
If you order basic kit complete: Items 1-18 ... (inductor values may change) It will arrive as:
[Image: basic%20kitsm-M.jpg]
The 8 MHz crystal (12), the two jumpers (11)  came installed from assembly

Filter option (#20 and #21), at least for U.S., possibly others:
(21) Linear Technology
$7.00 US  (LTC1569CS8-7#PBF) or $7.70 if you want Industrial temp range (LTC1569IS8-7#PBF)
+ shipping
http://www.linear.com/purchase/LTC1569-7

And a package of 10 SMA connectors, if you choose to install them:
(20) Amazon
$8.56
http://www.amazon.com/Launch-Female-Stra...ge_o02_s00
[Image: 618Et694iGL._SX522_.jpg]


Stations: 689, 791, 1439, 3020
#4
Thanks for the update Cutty! I only wanted to help. Some people prefer one stop shopping. Of course there are numerous suppliers, especially in the US. Octopart.com is very helpful for sourcing all items.
Stations: 1471
#5
(2016-05-03, 11:29)WX3080 Wrote: Thanks for the update Cutty! I only wanted to help. Some people prefer one stop shopping. Of course there are numerous suppliers, especially in the US. Octopart.com is very helpful for sourcing all items.

You did fine!  Being world wide alternate sources are important, especially costs... I found that obtaining the basic testing relase as a package (1-18) about as cost effective as searching all over and tracking them down....and much more convenient.... the exceptions were the add ons by a few dollars. 

Also it seems to me that unless a person wants to build their own ferrites, as many of us have done, (or use other type loops) ordering the Friese is a superb choice, and the cost is totally reasonable....they are well made, and characteristics and standardization are important.


Stations: 689, 791, 1439, 3020
#6
Is it possible that more information be made available for those of us hoping to get a System Blue? Obviously a lot is being discussed behind closed doors that those of us who are not "made men" not privy to since we don't currently have a registered system.

For instance, what is the recommended antenna system. I have seen hints of a triangular ferrite system..is that the new recommended system? Of is the coax loop antenna still the best?

Do we want to install the optional filters? How does one decide?

I'd like to potentially buy the components and have them ready when the systems are made available but we are in kind of a catch 22 situation.

Will those of us who do not have systems ever get a chance to order a Blue system, or do we need to wait till all the existing members of the club get one first?
#7
(2016-05-03, 14:33)Junebug Wrote: Is it possible that more information be made available for those of us hoping to get a System Blue?  Obviously a lot is being discussed behind closed doors that those of us who are not "made men" not privy to since we don't currently have a registered system.

For instance, what is the recommended antenna system.  I have seen hints of a triangular ferrite system..is that the new recommended system? Of is the coax loop antenna still the best?

Do we want to install the optional filters?  How does one decide?

I'd like to potentially buy the components and have them ready when the systems are made available but we are in kind of a catch 22 situation.

Will those of us who do not have systems ever get a chance to order a Blue system, or do we need to wait till all the existing members of the club get one first?
@ Junebug...
well... your question involves discussion well beyond this thread's intent, perhaps but for quick answers:
First of all, the information is evolving. 2nd of all, it is not a very large 'club' as it were... there are currently only about 7 'testing' blues currently, and much of any information about "BLUE" is still being evolved. Let's say that for operational purposes so far, find out everything you can about the previous systems, Green and especially RED. ... about lightning characteristics, and detecting strokes. Generic info.
No operator will simply be able to 'plug'n'play' this system and expect consistent quality results. The Blitzortung Network evolves.
Both antenna concepts have advantages and disadvantages. From delays in signals, to physical size. In a perfect world, everybody would use standardized antennas, but part of this project is experimentation so there are variations.
Unlike previous designs, BLUE will allow 3 loops for H field detection to be used... up to three.  Two or three mounted to detect the H field component of  'vertically' polarized impulses, or two in that physical plane, with the third mounted to detect H component of 'horizontally' polarized impulses.  The E field probe detects E component of Vertically polarized impulses.

Only way to know you need any extra filters is to get an operational system, find out your electromagnetic environment, and determine if the filters would help. That's why they're optional. For many folks/locations, they'll be unnecessary.

Yes, you'll get an opportunity to "join the club"... follow Egon's instructions in the initial post...being patient until they are announced, and the sooner the first 100 builds begin to deplete, the sooner the next order would be submitted for production. Smile

If you've further questions, might start a new thread about them, and leave this for ordering issues, etc...
Cheers!
Mike


Stations: 689, 791, 1439, 3020
#8
Smile  Yes, I was having real issues clicking the "post reply" button... Rolleyes

was trying for about 10 minutes... you almost beat me!

Mike


Stations: 689, 791, 1439, 3020
#9
When the leading post in this thread is updated by Egon, it does not show up in the Unread Posts or Today's Posts lists. Would it be possible to add a brief "updated" post to the thread when there are changes? Thanks.
Stations: 1075, 1472
#10
Replying in order to subscribe to this thread.

Awaiting the opportunity to buy two System Blues and replace two System Greens.

Thanks

Station 671  in Rochester, Minnesota, U.S.A.

Station 635 in Peoria, Illinois, U.S.A.
Stations: 671, 1699, 1723
#11
Awaiting for the opportunity to order one complete set of System Blue

Moscow, Russian Federation
#12
Keen to get a Blue for Melbourne Australia
#13
Looking forward to getting my hands on this system. You might want to update the USB adapter information in the System Blue Assembly document to avoid confusion. The text says the plug is a USB-B, but the pictures and the part number suggest that the USB connector is actually a Mini-B.
#14
(2016-05-12, 11:36)Jorgeminator Wrote: Looking forward to getting my hands on this system. You might want to update the USB adapter information in the System Blue Assembly document to avoid confusion. The text says the plug is a USB-B, but the pictures and the part number suggest that the USB connector is actually a Mini-B.

Good catch.. the connector is a USB Mini-B 5 pin


Stations: 689, 791, 1439, 3020
#15
(2016-05-14, 12:13)Egon Wrote: Thanks for the note, I have updated the assembly instruction, further suggestions are welcome.


Not only you, the following parts are also waiting for the boards and your subsequent orders. Big Grin


 

Amazing! I better get that soldering iron ready.  Cool What thickness do you recommend for the solder wire?
#16
jeeeey FINALY the blue sys is out. now i need money Confused Confused
#17
Hi.
i'm interested in system blue but want a fully assemble ready to go system plug n play.

Thanks.
Stations: 970
#18
Not something very important ...
In the documentation it is spoken about "CAT" cable :

"The router is connected at the RJ45 network port with a CAT cable."
"The H-field pre-amplifier is connected with a shielded CAT cable"


"CAT" itself is not a model of cable even if everybody understand what you mean.    CAT followed by a number is a category of twisted pair cable which can be shielded or not.

UTP or FTP, CAT 5e or higher, for instance, seems more appropriate

Joël
Stations: 1475
#19
(2016-05-14, 17:09)BlackRockShooter Wrote: jeeeey FINALY the blue sys is out. now i need money  Confused  Confused
NOT YET!   Boards are in manufacturing!
(2016-05-14, 17:27)andyweather Wrote: Hi.
i'm interested in system blue but want a fully assemble ready to go system plug n play.

Thanks.
Sorry andyweather:  This system is not plug'n'play, and does not come fully assembled.
Please see the assembly instructions..
http://de.blitzortung.org/Compendium/Doc...B_20_1.pdf


Stations: 689, 791, 1439, 3020
#20
Thats a shame its no good to me then as i cannot solder.

Will have to stay with system red.
Stations: 970


Possibly Related Threads…
Thread Author Replies Views Last Post
  System Blue order status (10.3.2020) Egon 33 146,528 2023-11-29, 21:57
Last Post: cutty
  Issue starting Sunday August 1st at 13.00 PA4EME 2 7,245 2021-08-07, 23:08
Last Post: orion_jb2001
  Received System Blue offer. The order was ignored. s1ini 5 27,322 2019-10-07, 17:42
Last Post: s1ini
  [moved] German: Order Question starlord 1 18,013 2017-12-14, 07:34
Last Post: starlord
  Order Question chevyman142000 6 40,344 2016-06-01, 03:59
Last Post: chevyman142000

Forum Jump:


Users browsing this thread: 26 Guest(s)