Blitzortung.org Forum

Full Version: Low signals
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello,

I got my system running (RED) and i notice that my detections are low compared to others.

Know it's running but do i need to improve ?

In attach i added a screenshot
(2016-07-27, 18:38)NobelsKr Wrote: [ -> ]I got my system running (RED) and i notice that my detections are low compared to others.

We know nothing about the settings of your station. Maybe configuration is bad, antenna not connected, very bad location. The screenshot support your statement, but does not help.
(2016-07-28, 21:55)Knolau Wrote: [ -> ]We know nothing about the settings of your station. Maybe configuration is bad, antenna not connected, very bad location. The screenshot support your statement, but does not help.

RS232 -> board speed is 115200 Baud
GPS -> EM-406A/SiRF
GPS Speed -> 19200 Baud

Firmware is 6.20.2

Do you need more settings ? just ask  Smile
(2016-07-28, 21:55)Knolau Wrote: [ -> ]
(2016-07-27, 18:38)NobelsKr Wrote: [ -> ]I got my system running (RED) and i notice that my detections are low compared to others.
I think, You have Green, not RED! There are jumpers  (2x4) to adjust the gain 
[Image: Jumper%20%28Wertestellung%29.GIF]
Yours maybe too low.
Hi Kris!

NobelsKr Wrote:Do you prefer talking by the forum
Coincidence, that i spent some time in the forum, i´m very busy. So it´s better to discuss in the forum, other people can read this and may help too.
By the way, You have private messaging disabled.

There must be instructions for green stations somethere in the net. Maybe somebody has a link.

Cheers

Knolau
And here is a link to the Green documentation : http://fr.blitzortung.org/Compendium/Doc...CB_5.7.pdf
(2016-07-28, 22:13)NobelsKr Wrote: [ -> ]Do you need more settings ? just ask  Smile

Gain settings? Read the manual and look at the amplifier board Wink

It looks like your station detects just on 1 channel (red), antenna is in West-East direction. Other ferrite rod connection seems to be wrong. Just a vague speculation.  Cool