+- Blitzortung.org Forum (https://forum.blitzortung.org)
+-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29)
+--- Forum: General Discussion (https://forum.blitzortung.org/forumdisplay.php?fid=31)
+--- Thread: Low signals (/showthread.php?tid=1882)
Low signals - NobelsKr - 2016-07-27
Hello,
I got my system running (RED) and i notice that my detections are low compared to others.
Know it's running but do i need to improve ?
In attach i added a screenshot
RE: Low signals - Knolau - 2016-07-28
(2016-07-27, 18:38)NobelsKr Wrote: I got my system running (RED) and i notice that my detections are low compared to others.
We know nothing about the settings of your station. Maybe configuration is bad, antenna not connected, very bad location. The screenshot support your statement, but does not help.
RE: Low signals - NobelsKr - 2016-07-28
(2016-07-28, 21:55)Knolau Wrote: We know nothing about the settings of your station. Maybe configuration is bad, antenna not connected, very bad location. The screenshot support your statement, but does not help.
RS232 -> board speed is 115200 Baud
GPS -> EM-406A/SiRF
GPS Speed -> 19200 Baud
Firmware is 6.20.2
Do you need more settings ? just ask
RE: Low signals - Knolau - 2016-07-28
(2016-07-28, 21:55)Knolau Wrote:I think, You have Green, not RED! There are jumpers (2x4) to adjust the gain(2016-07-27, 18:38)NobelsKr Wrote: I got my system running (RED) and i notice that my detections are low compared to others.
![[Image: Jumper%20%28Wertestellung%29.GIF]](http://www.dieters-wetter.de/bilder/Jumper%20%28Wertestellung%29.GIF)
Yours maybe too low.
RE: Low signals - Knolau - 2016-07-29
Hi Kris!
NobelsKr Wrote:Do you prefer talking by the forumCoincidence, that i spent some time in the forum, i´m very busy. So it´s better to discuss in the forum, other people can read this and may help too.
By the way, You have private messaging disabled.
There must be instructions for green stations somethere in the net. Maybe somebody has a link.
Cheers
Knolau
Low signals - DelandeC - 2016-07-29
And here is a link to the Green documentation : http://fr.blitzortung.org/Compendium/Documentations/Documentation_2011-09-12_Green_PCB_6.7_PCB_5.7.pdf
RE: Low signals - Knolau - 2016-07-31
(2016-07-28, 22:13)NobelsKr Wrote: Do you need more settings ? just ask
Gain settings? Read the manual and look at the amplifier board
It looks like your station detects just on 1 channel (red), antenna is in West-East direction. Other ferrite rod connection seems to be wrong. Just a vague speculation.
