Insert the processor ID in the "Assign a new station: (Processor-ID)" field.
Regards,
Egon
Dear Egon,
Every time I have inserted such as the station number "1863" it has immediately disappeared.
Mayhaps the "Processor-ID" is not the station number at all, but rather my "User ID"?
Or mayhaps an obscure number such as that of a CPU "processor ID"?
Confused, but still trying to understand...what specifically is the mysterious "processor ID?
Regards,
Blitzfeuer
Hi Dries, thanks for the graphic -- it is something I have never seen before. Even just now I logged in again using the DE-language link you gave me, and it just shows the info I have already unsuccessfully entered, with no view corresponding to your graphic. So a "processor ID" is really a "device ID" without the dashes. Great, but how does one get the view you graciously presented that applies to me, User 1546, station 1863 -- simply by logging in?
Insert the processor ID in the "Assign a new station: (Processor-ID)" field.
Regards,
Egon
Dear Egon,
Every time I have inserted such as the station number "1863" it has immediately disappeared.
Mayhaps the "Processor-ID" is not the station number at all, but rather my "User ID"?
Or mayhaps an obscure number such as that of a CPU "processor ID"?
Confused, but still trying to understand...what specifically is the mysterious "processor ID?
Regards,
Blitzfeuer
Hi Dries, thanks for the graphic -- it is something I have never seen before. Even just now I logged in again using the DE-language link you gave me, and it just shows the info I have already unsuccessfully entered, with no view corresponding to your graphic. So a "processor ID" is really a "device ID" without the dashes. Great, but how does one get the view you graciously presented that applies to me, User 1546, station 1863 -- simply by logging in?
Log in to your controller (the one that you build) . Then on the Status page, about half way down, you will see the it.
Insert the processor ID in the "Assign a new station: (Processor-ID)" field.
Regards,
Egon
Dear Egon,
Every time I have inserted such as the station number "1863" it has immediately disappeared.
Mayhaps the "Processor-ID" is not the station number at all, but rather my "User ID"?
Or mayhaps an obscure number such as that of a CPU "processor ID"?
Confused, but still trying to understand...what specifically is the mysterious "processor ID?
Regards,
Blitzfeuer
Hi Dries, thanks for the graphic -- it is something I have never seen before. Even just now I logged in again using the DE-language link you gave me, and it just shows the info I have already unsuccessfully entered, with no view corresponding to your graphic. So a "processor ID" is really a "device ID" without the dashes. Great, but how does one get the view you graciously presented that applies to me, User 1546, station 1863 -- simply by logging in?
(2019-04-18, 19:52)Egon Wrote: We have not received any signal from the station yet. No region has been assigned yet because no position has been received yet.
/Egon
Yeah, I’ve not got a GPS antenna yet. Can I get participant status on the forums for some assistance with antenna designs?
2019-04-18, 20:34 (This post was last modified: 2019-04-18, 20:35 by mwaters.)
AFAIK, the only way that anyone ever received participant status was after they started sending signals to the BT servers. Sorry.
A GPS antenna and an E-field probe should do that for you, provided that you have close enough strikes (the E-field probe is not sensitive enough to receive distant strikes). Otherwise, one or two 4-turn wire loops 1m in diameter should get you started as easily and inexpensively as is possible.
2019-04-26, 04:56 (This post was last modified: 2019-05-01, 15:03 by hazet.)
Hello
User Name for Forum: hazet
Station Number : 1355
Region: Europe, France
Station was listed before. Does not appear in the station list nor in the map.
Regards Hans
Mai 1st: No answer, no reaction, no explanation? Why? Is this a dead forum thread ?
To pile on, a screenshot of another strange database query result which occurs for a couple of weeks. Hope it can help the maintainers tracing database errors.
Hi. I found a temporary solution to this problem is removing the station from the account and re-adding station.
At the same time, the station icon on the dynamic map disappeared and does not appear for a long time(
But after a while everything returned as it was in addition my station disappeared from the search by country)