Noise spikes on board, System Blue
These spikes come from the board itself, but only on the first channel (red) because it's too close to the network controller and not well isolated from the digital part. I've already seen that on my (beta) board and reported it, but it seems there was not enough time to fix/investigate that.

The spikes can be lowered a bit by disabling the high-pass filter (-> HP off). Please change the gain from 5*16 to 16*5. The overall gain of the BLUE system is really high and the first stage should always be higher than the second one.
Stations: 538, 672, 1534, 1555, 1696, 1712, 2034, 2219

Messages In This Thread
RE: Noise spikes on board, System Blue - by Tobi - 2016-06-16, 20:58

Users browsing this thread: 1 Guest(s)