Reactivating an old Green PCB 6.8 USB - troubles
#5
Do you have the documentation? If not login to the blitzortung site and wander over to Project Area > Compendium then Project Descriptions. Pin 4 of the GPS-DEVICE connector is connected via JP2 to pin 14 RxD of the ATMega so pin 4 on the PCB needs to be fed a data stream, check that JP2 is set correctly. B-)
Cheers
Dave.

Stations: 1627
Reply


Messages In This Thread
RE: Reactivating an old Green PCB 6.8 USB - troubles - by allsorts - 2017-07-18, 21:27

Possibly Related Threads...
Thread Author Replies Views Last Post
  GPS troubles with my blue box hazet_CHAM 3 4,673 2017-12-30, 03:23
Last Post: Dale.Reid



Users browsing this thread: 1 Guest(s)