New member, having some problems with H-field big interference bursts..
#9
(2018-09-15, 18:31)dupreezd Wrote:
(2018-09-15, 18:13)Michidragon Wrote:
(2018-09-14, 11:46)dupreezd Wrote: Michidragon, the way you specified your antennas on your BO station setup in not correct. Input 0 - 2 is for the H-Field. Leave Input 2 as "undefined" as you only have 2 ferrites.
Input 3 is for the E-Field.

Got it. changing it now....

EDIT: Done, let me know if that is correct?  I have 0,1 = H-field,  2 set 'undefined'  (for when/if I add a 3rd H-field) and now 3 is E-field. (I added the E-Field to my station last night.)

Yes, it is correct now, but is your E-Field really 3000mm (3m) long. It should only be 100mm

Now follow Cutty setup instructions. Smile

Whoops, no its 300mm/30cm. (Too long? Trimming that is sure easy enough..  I read that 10cm was a minimum, made it 30cm to make it easier to mount the PVC housing I put it in, to my mast. That said it can surely just be 10cm and sit in the same housing.)


Messages In This Thread
RE: New member, having some problems with H-field big interference bursts.. - by michidragon - 2018-09-15, 19:22



Users browsing this thread: 1 Guest(s)