Posts: 1,220
Threads: 77
Joined: 2012-07-01
(2016-05-29, 10:26)Wetter-HDH Wrote: Hi everyone.
I have ordered the System blue and send it to egon(at)blitzortung.org But get a failure message, that the message could not be delievered :-(
So i dont know, how i can make a order. A short information would be nice. Thanks in advance.
Andreas
"(at)" means "@"
Posts: 142
Threads: 12
Joined: 2016-05-12
2016-05-29, 11:03
(This post was last modified: 2016-05-29, 11:09 by Jorgeminator.)
(2016-05-29, 10:47)Cutty Wrote: (2016-05-29, 06:04)rbaleja Wrote: Hello everyone.
I have question abaut Buzzer.
What kind of buzzer (with or without generator) is in blue system?
Thanks
Robert
Unless the production has changed from the pre-release run, that buzzer, and the 8 MHz crystal will already be installed...
![[Image: basic%20kit-S.jpg]](https://photos.smugmug.com/Weather/Blitzortung-Blue/i-hs9sTL3/0/S/basic%20kit-S.jpg)
I think the picture on the thread's front page is the most recent.
Looks like the buzzer and the crystal need to be installed, too.
Posts: 1,781
Threads: 63
Joined: 2013-07-23
(2016-05-29, 11:03)Jorgeminator Wrote: [quote pid='11803' dateline='1464518841']
I think the picture on the thread's front page is the most recent.
Looks like the buzzer and the crystal need to be installed, too.
[/quote]
Yes... you are correct! There are also some circuit differences from the pre-development... I'll need to be more careful!
Thanks!
Mike
Posts: 35
Threads: 9
Joined: 2013-03-19
Hello,
I would like to order a Blue only station I does not understand the PDF file. Someone could help me I am french is English is not my forte. Thank you.
Posts: 630
Threads: 73
Joined: 2012-08-15
2016-05-29, 16:26
(This post was last modified: 2016-05-29, 16:42 by DelandeC.)
Julien, come on blitzortung.fr chat.
We'll talk about that.
Plus: http://www.blitzortung.fr/viewtopic.php?...3730#p3730
Posts: 142
Threads: 12
Joined: 2016-05-12
Do we get a tracking number for the orders that are delivered by registered mail?
Posts: 8
Threads: 2
Joined: 2016-04-19
(2016-05-29, 10:56)RichoAnd Wrote: (2016-05-29, 10:26)Wetter-HDH Wrote: Hi everyone.
I have ordered the System blue and send it to egon(at)blitzortung.org But get a failure message, that the message could not be delievered :-(
So i dont know, how i can make a order. A short information would be nice. Thanks in advance.
Andreas
"(at)" means "@"
![Tongue Tongue](https://forum.blitzortung.org/images/smilies/tongue.gif) Thats clear. I have wrote more than one email in my live.
Posts: 1,220
Threads: 77
Joined: 2012-07-01
(2016-05-29, 19:43)Wetter-HDH Wrote: (2016-05-29, 10:56)RichoAnd Wrote: (2016-05-29, 10:26)Wetter-HDH Wrote: Hi everyone.
I have ordered the System blue and send it to egon(at)blitzortung.org But get a failure message, that the message could not be delievered :-(
So i dont know, how i can make a order. A short information would be nice. Thanks in advance.
Andreas
"(at)" means "@"
Thats clear. I have wrote more than one email in my live. As PC supporter for more than 25 years I have seen a little of everything - eg. "O" is used in a spreadsheet instead of "0"
Posts: 1,220
Threads: 77
Joined: 2012-07-01
(2016-05-29, 19:56)RichoAnd Wrote: (2016-05-29, 19:43)Wetter-HDH Wrote: (2016-05-29, 10:56)RichoAnd Wrote: (2016-05-29, 10:26)Wetter-HDH Wrote: Hi everyone.
I have ordered the System blue and send it to egon(at)blitzortung.org But get a failure message, that the message could not be delievered :-(
So i dont know, how i can make a order. A short information would be nice. Thanks in advance.
Andreas
"(at)" means "@"
Thats clear. I have wrote more than one email in my live. As PC supporter for more than 25 years I have seen a little of everything - eg. "O" is used in a spreadsheet instead of "0" ![Tongue Tongue](https://forum.blitzortung.org/images/smilies/tongue.gif)
Posts: 18
Threads: 1
Joined: 2016-05-22
I'm extremely excited to get a kit. Thanks to all the developers for making this project possible.
Incidentally, I was out backpacking this weekend and used the site to watch approaching storms for lighting. It was very nice to get an extra piece of information about the weather conditions.
It will be fun to build and set up a station and improve the coverage around my area.
Vielen Dank!
Posts: 22
Threads: 8
Joined: 2016-05-11
Hi Egon,
Can you confirm that you received my 2 station order ?
I sent you by forum internal email.
Many thanks in advance,
Paulo
Posts: 15
Threads: 0
Joined: 2015-10-04
Hi!
as i am new to this forum, and i have offered a lot of "freebies"..
Let me say this word's:
Egon and all his companions are only "normally people".. Just as you and me..
There are lots of things they have to care about...
Wife, children...family.... profession and so on and so on
not even everything must be "at once"..
be patient.....
Greets out of Bavaria
Stefan
Posts: 1,781
Threads: 63
Joined: 2013-07-23
(2016-05-30, 19:34)Hacklzwerg Wrote: Hi!
as i am new to this forum, and i have offered a lot of "freebies"..
Let me say this word's:
Egon and all his companions are only "normally people".. Just as you and me..
There are lots of things they have to care about...
Wife, children...family.... profession and so on and so on
not even everything must be "at once"..
be patient.....
Greets out of Bavaria
Stefan Also, folks may not be aware of it, but every single board has to have firmware installed prior to shipping. That means a couple of connectors have to be soldered in also. Any extra parts associated with your order, such as antennas, small items have to be gathered and packaged. Kits just don't come from the factory box, jump in an envelope, and magically transport themselves to you.
The real fun begins if a kit recipient hasn't bothered to read instructions thoroughly, fails to research forums to see how many hundred other folks have faced the same issue they're looking at, and solved it, instead immediately post a query that's been asked and answered a dozen times already.
The goal is to keep Developers off the forum, and doing what they do best... developing and improving.
Posts: 15
Threads: 0
Joined: 2015-10-04
(2016-05-30, 20:00)Cutty Wrote: (2016-05-30, 19:34)Hacklzwerg Wrote: Hi!
as i am new to this forum, and i have offered a lot of "freebies"..
Let me say this word's:
Egon and all his companions are only "normally people".. Just as you and me..
There are lots of things they have to care about...
Wife, children...family.... profession and so on and so on
not even everything must be "at once"..
be patient.....
Greets out of Bavaria
Stefan Also, folks may not be aware of it, but every single board has to have firmware installed prior to shipping. That means a couple of connectors have to be soldered in also. Any extra parts associated with your order, such as antennas, small items have to be gathered and packaged. Kits just don't come from the factory box, jump in an envelope, and magically transport themselves to you.
The real fun begins if a kit recipient hasn't bothered to read instructions thoroughly, fails to research forums to see how many hundred other folks have faced the same issue they're looking at, and solved it, instead immediately post a query that's been asked and answered a dozen times already.
The goal is to keep Developers off the forum, and doing what they do best... developing and improving. ![Smile Smile](https://forum.blitzortung.org/images/smilies/smile.gif)
ahhh...
why do the developers seem to be so arrogant?
we ((me) are developing and manufacturing electronics and parts) since thirty years..
But if my FREE and social work is not welcome...
i wll quit...
Posts: 1,781
Threads: 63
Joined: 2013-07-23
(2016-05-30, 20:12)Hacklzwerg Wrote: (2016-05-30, 20:00)Cutty Wrote: (2016-05-30, 19:34)Hacklzwerg Wrote: Hi!
as i am new to this forum, and i have offered a lot of "freebies"..
Let me say this word's:
Egon and all his companions are only "normally people".. Just as you and me..
There are lots of things they have to care about...
Wife, children...family.... profession and so on and so on
not even everything must be "at once"..
be patient.....
Greets out of Bavaria
Stefan Also, folks may not be aware of it, but every single board has to have firmware installed prior to shipping. That means a couple of connectors have to be soldered in also. Any extra parts associated with your order, such as antennas, small items have to be gathered and packaged. Kits just don't come from the factory box, jump in an envelope, and magically transport themselves to you.
The real fun begins if a kit recipient hasn't bothered to read instructions thoroughly, fails to research forums to see how many hundred other folks have faced the same issue they're looking at, and solved it, instead immediately post a query that's been asked and answered a dozen times already.
The goal is to keep Developers off the forum, and doing what they do best... developing and improving. ![Smile Smile](https://forum.blitzortung.org/images/smilies/smile.gif)
ahhh...
why do the developers seem to be so arrogant?
we ((me) are developing and manufacturing electronics and parts) since thirty years..
But if my FREE and social work is not welcome...
i wll quit...
Ah... something is mis-understood. That post was supporting you, merely adding another thought. If you somehow were offended, that's too bad, but please keep your ideas and suggestions coming!
Mike
Posts: 70
Threads: 2
Joined: 2012-12-06
(2016-05-30, 20:12)Hacklzwerg Wrote: why do the developers seem to be so arrogant?
Where did you read something arrogant ?
Posts: 15
Threads: 0
Joined: 2015-10-04
Hi!
@ Cutty and Joel
Well, that seems to be the result of a translation error... That was my fault
and i want to apologize for this mistake...
I'm sorry about that...
Stefan
Posts: 1,220
Threads: 77
Joined: 2012-07-01
It is the problem with translations - nuances are lost and a "quick" remark becomes something bad.
Even when I use the "quick" there may be a problem - "quick" meant fun,
On the other hand . if you write without nuances, seemed to "boring" "dry".
/Richo
Posts: 11
Threads: 3
Joined: 2016-05-16
Hi Egon,
just asking: are all orders processed?
Just to know if my email on sunday was too late to order or not
Thank you.
Posts: 70
Threads: 2
Joined: 2012-12-06
(2016-05-31, 05:08)Hacklzwerg Wrote: Hi!
@ Cutty and Joel
Well, that seems to be the result of a translation error... That was my fault
and i want to apologize for this mistake...
I'm sorry about that...
Stefan
Dear Stefan
Thanks for your reply. You are right, bad translations can lead to misunderstandings.
For most of us English is not the native language but this is the international language. Personally I would prefer French
Regards
Joël
|