System blue problem
#1
Hi guys I have some problem with my system blue. 
In admin control panel I have this message :
You need to Save to Flash and Reboot to take effect some of the new settings! 
If I click on save button and reboot,  the system has the same message. 
I have the 8.2 firmware. 
Another problem is that the System blue often emits a long beep and the LAN LED disappears. 
I have to turn it off and on again to unlock it.
Can you help me?
Thanks in advance

excuse for my bad English
Stations: 1583
Reply
#2
(2016-11-29, 05:00)ohifra Wrote: You need to Save to Flash and Reboot to take effect some of the new settings! 
If I click on save button and reboot,  the system has the same message. 
That's strange. Is this still the case? Can you reproduce it?

(2016-11-29, 05:00)ohifra Wrote: Another problem is that the System blue often emits a long beep and the LAN LED disappears. 
Unfortunately this is currently a common issue. Try to enable "Hide Hardfaults" under System menu.
Stations: 538, 1534, 1712, 2034, 2219
Reply
#3
(2017-01-06, 13:37)Tobi Wrote:
(2016-11-29, 05:00)ohifra Wrote: You need to Save to Flash and Reboot to take effect some of the new settings! 
If I click on save button and reboot,  the system has the same message. 
That's strange. Is this still the case? Can you reproduce it?

(2016-11-29, 05:00)ohifra Wrote: Another problem is that the System blue often emits a long beep and the LAN LED disappears. 
Unfortunately this is currently a common issue. Try to enable "Hide Hardfaults" under System menu.

Good morning, I solved the problem by connecting the detector with a LAN cable category 7 and after I set the LAN port in full duplex.
Stations: 1583
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Lightbulb Fixed: Problem with System Green & Windows Tracker MuellerJ 1 11,345 2016-09-22, 19:03
Last Post: MuellerJ

Forum Jump:


Users browsing this thread: 1 Guest(s)